KDP guide

Spine and cover size: the formula

Work out the spine, the full-wrap cover and the barcode area for a KDP paperback.

Checked 2026-11-07

A KDP paperback cover is one PDF holding the back cover, the spine and the front cover. Its width depends on the page count and the paper. Change one page and the spine changes.

PagesSpine, whiteSpine, cream6 × 9 in cover (white)
1080.2432 in0.2700 in12.4932 × 9.25 in
1200.2702 in0.3000 in12.5202 × 9.25 in
2000.4504 in0.5000 in12.7004 × 9.25 in

The formula

Spine = pages × 0.002252 in on white paper, or × 0.0025 in on cream paper. Cover width = 0.125 + trim width + spine + trim width + 0.125 in. Height = 0.125 + trim height + 0.125 in.

For a 108-page 6 × 9 in book on white paper: 0.125 + 6 + 0.2432 + 6 + 0.125 = 12.4932 in wide and 9.25 in tall.

Spine text needs more than 79 pages

KDP only prints spine text on books with more than 79 pages, with 0.0625 in of clearance on each side. On a 0.24 in spine that leaves less than 0.12 in: 7 pt text barely fits. Bookpressly's logbook covers leave the spine plain under 150 pages.

The barcode area

KDP prints a 2 × 1.2 in barcode at the bottom right of the back cover, 0.25 in from the edges. Keep that box clear: artwork or text there can stop the barcode from scanning.

Hardcovers are different

A hardcover cover wraps around boards, so it has a wider wrap margin instead of bleed and a slightly wider spine. Bookpressly sizes it separately; always check against KDP's own hardcover template before printing.

Apply it without the maths

The studio applies these rules to every page and every cover, then checks the file before you download it.

Sources

KDP can change its rules; the KDP Previewer always has the last word.